28
8.2.Power Supply Disassembly and Installation
8.2.1.Power Supply Disassembly
1
）
Remove the four screws that secure the power supply on the chassis (see Figures 1, 2,
3, and 4), and then remove the six screws that secure the copper bars on the power
supply (Figure 6). Unplug the fan cable on the power supply (Figure 6).
2
）
After the above operation is completed, gently pull out the power supply (do not pull
out too long, the power control cable is still connected to the control panel), as shown in
the figure
：
