Micro BULLET, Owner'S Manual

Page: 4 / 40

4
We don't want you to get hurt - please follow these safety rules.
> Always check over your MICRO SCOOTER prior to riding, and make certain that all clamps, folding handles, bolls and screws are
tightened properly, also check the wheels for wear and tightness and make sure that the steering column is securely held in the
proper position.
> Always wear a helmet, wrist-pads, elbow-pads, knee-pads and shoes with rubber soles when riding the MICRO SCOOTER.
> Avoid riding downhill, as the integrated break does not offer reliable protection on slopes. The brake is not designed for downhill
rides!
> The folding mechanism
should only be operated by an adult.
> The brake fender does get hot - do not touch after braking. Avoid braking for long stretches.
> Do not exceed the maximum speed of 10 km/h (6,2 MPH).
> Avoid roads, paths or other areas used by cars.
> Always follow the traffi c rules and guidelines in your area.
> Never ride with more than one person on a MICRO SCOOTER.
> Never ride a MICRO SCOOTER at dusk or night.
> Do not use your MICRO SCOOTER on wet, oily, sandy, dirt, icy, rough or uneven surfaces.
> Do not stunt ride - know your abilities and limits and always ride with control.
> Do not apply any alterations to your MICRO SCOOTER which would affect your safety.
> Carrying capacity 100 kg (220 Ibs).
> Frequent change of wheels can cause the safety to become ineffective and must be reapplied.
> Self-locking nuts and other self-locking fi xings may lose their effectiveness when
opened and tightened a couple of times. To avoid this please change these parts after
opening and tightening more than twice.
> If you use parts from another manufacture on a MICRO SCOOTER the warranty is no longer valid.
Safety rules
Please fi nd the serialnumber stamped
at the front of your scooter