Page 13
Delivery
wireSENSOR, WPS MK60-M / MK88-M
3.
Delivery
3.1
Unpacking, Included in Delivery
1 Sensor
1 Assembly Instructions
Do not unpack the draw-wire sensors by pulling the wire or wire bolt / clip.
Ensure that the goods are forwarded in such a way that no damage can occur.
Check the delivery for completeness and shipping damage immediately after unpacking.
If there is damage or parts are missing, immediately contact the manufacturer or supplier.
i
The transport lock for the measuring wire may only be removed directly before installation and only by
qualified personnel.
3.2
Storage
Store the sensors only with mounted transport lock. This prevents the measuring wire from being pulled out
as well as accidental wire snapping.
> Risk of injury from whiplash effect of the wire with assembly bolts/clips
- Temperature range storage: -40 °C ... +85 °C (-40 °F ... +185 °F)
- Humidity:
5 - 95 % (non-condensing)
- Atmospheric pressure
Summary of Contents for WireSensor Series
Page 4: ...wireSENSOR WPS MK60 M MK88 M...
