Page 11
Operation
thermoIMAGER NetPCQ
6.
Operation
6.1
Operation Modes
The thermoIMAGER NetPCQ can be used in three different operation modes:
1. Converter USB – Ethernet with direct connection to a PC (point-to-point connection)
2. Converter USB – Ethernet with connection of a PC via a network or via the internet
3. Stand-alone operation with an IR camera
For powering the thermoIMAGER NetPCQ you can use any suitable industrial power supply with a voltage
output between 12 VDC and 24 VDC
6.2
Remote Access to the thermoIMAGER TIM NetPCQ
For settings on the thermoIMAGER TIM NetPCQ you can connect a keyboard and a mouse to the available
USB sockets as well as a monitor to the VGA socket
Another very simple option is remote control software, for example Remote Desktop (RDP) from Windows
or Ultra VNC with NetBox Utility, which is already included on the TIM Connect software CD provided with
thermoIMAGER TIM.
After installation you can have access to the thermoIMAGER TIM NetPCQ either from a PC directly connected
over an Ethernet cable or from a PC which is located anywhere and connected to the same network. Also
remote connection via the internet is possible.
To install NetBox Utility on your PC, please start
install.bat
in the
/NetBox Utility
directory on
the thermoIMAGER TIM Connect USB flash drive.
In addition to the utility software, the UltraVNC viewer will also be installed.
This program is available
Start/Programs/NetBox-UltraVNC
.
Before starting the NetBox Utility on your PC, please follow the instructions for specifying a fixed IP ad-
