MICRO-EPSILON reflectCONTROL RCS, Instruction Manual, Page: 32 / 134

Working with 3DInspect
Page 32
Note: If the results of the measuring program to be deleted are used in subsequent programs, a
dialog for confirming the deletion will appear.
Fig. 3.34: “Remove program” dialog
3.14 Moving/Duplicating a Measuring Program
You have the option of moving measuring programs in the program list after they have been added:
Click on the desired program in the program list, hold the mouse button down, move the program to
the desired position and then let go of the mouse button.
Fig. 3.35: Moving a measuring program
If you are using multiple measuring program groups, you have the option of moving measuring programs
to another program group subsequently. Additionally, you may duplicate existing measuring programs.
To do so, use the correspondent buttons.
Fig. 3.36: Duplicate measuring program / Move measuring program to another program group
- 1: Move Measuring program to another program group
- 2: Duplicate measuring program
3.15 Adding/Removing Measuring Program Groups
If a large number of measuring programs are required for a measuring task, it is advantageous to split the
measuring programs into measuring program groups. Each measuring program group consists of the
“Data preprocessing,”, “Find objects” and “Combine objects” sub groups. The program groups are pro-
cessed one after another, and inside a program group the sub groups are processed in the following or-
der: “Data preprocessing”

“Find objects”

“Combine objects”. 3DInspect gives you the option of
adding, removing and selecting measuring program groups. The list of active measuring programs dis-
plays the measuring programs of the currently selected measuring program group. Up to eight measu-
ring program groups can be created.
1 2