Page 8
Safety
MSC7401 / 7802 / 7602 Miniature sensor controller for inductive displacement sensors
Protect the sensor cable against damage.
> Destruction of the sensor
> Failure of the measuring device
1.3
Notes on CE Marking
The following apply to the induSENSOR MSC7401 / 7802 / 7602 series:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU, “RoHS” Category 9
Products which carry the CE mark satisfy the requirements of the EU directives cited and the European
harmonized standards (EN) listed therein. The EU Declaration of Conformity is available to the responsible
authorities according to EU Directive, article 10, at:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Koenigbacher Str. 15
94496 Ortenburg / Germany
The measuring system is designed for use in industrial environments and meets the requirements.
1.4
Intended Use
Das induSENSOR MSC7401 / 7802 / 7602 measuring system is designed for use in industrial environments.
It is used to control inductive displacement sensors based on the LVDT principle (Linear Variable Differential
Transformer) and for operation with LDR displacement sensors.
- The system must only be operated within the limits specified in the technical data
.
- The system must be used in such a way that no persons are endangered or machines and other material
goods are damaged in the event of malfunction or total failure of the system.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
