Page 6
induSENSOR, EDS
1.3
Notes on CE Identification
The following applies to EDS eddy current long stroke displacement sensors:
- EU directive 2004/108/EC
- EU directive 2011/65/EC, “RoHS” category 9
Products which carry the CE mark satisfy the requirements of the quoted EU directives and the European
standards (EN) listed therein. The EC declaration of conformity is kept available according to EC regulation,
article 10 by the authorities responsible at
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
The measuring system is designed for use in industry and satisfies the requirements.
1.4
Proper Use
- The sensors are used for
displacement measurement in presses, punches, rolling mills, ect
position determination of piston in hydraulic and pneumatic cylinders
- The sensors may only be operated within the limits specified in the technical data, see Chap.
- Use it in such a way that with malfunctions or total failure of the sensor, persons are not endangered and
machines are not damaged.
- Take additional precautions for safety and damage prevention for safety-related applications.
