Page 73
Set Sensor Parameter
optoNCDT 1320
The user management allows you to assign a custom password in the
Professional
mode.
Password
Value
Case-sensitive rules are observed for all passwords. Numbers are al-
lowed. Special characters are not allowed. Maximum length is set to 31
characters.
User level when
restarting
User /
Professional
Specifies the user level, with which the sensor starts after the re-
starting. For this purpose, MICRO-EPSILON recommends the selection
user
.
After configuration of the sensor the password protection is to be activated. Please note the password for
later reference.
7.6.7
Sensor Reset
Sensor
reset
Sensor settings
Button
Settings for baud rate, language, unit, keylock and echo mode
are deleted and the default parameters are loaded.
Measurement
settings
Button
Settings for measuring rate, trigger, evaluation range, peak
selection, error handling, averaging, zeroing/mastering, data
reduction and the setups are deleted. The 1
st
preset will be
loaded.
Reset all
Button
When clicking this button settings for sensor, measuring pref-
erences, access authorization, password and the setups are
deleted. The 1
st
preset will be loaded.
Restart sensor
Button
When clicking this button the sensor is rebooted with the set-
tings from the setup Favorite, see Chap.
7.6.4
.
Grey shaded
fields require a
selection.
Value
Dark-bordered
fields require you
to specify a value.
