Page 6
Safety
IF2030/PNET
1.3
Notes on CE Marking
The following apply to the IF2030/PNET interface module:
- EU Directive 2014/30/EU
1
- EU Directive 2011/65/EU, “RoHS” Category 9
Products which carry the CE mark satisfy the requirements of the EU directives cited and the European
harmonized standards (EN) listed therein. The EU Declaration of Conformity is available to the responsible
authorities according to EU Directive, article 10, at:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
D-94496 Ortenburg/Germany
The measuring system is designed for use in industrial environments and meets the requirements.
1.4
Intended Use
- The IF2030/PNET interface module is designed for use in industrial and laboratory applications. It is used
to convert the internal MICRO-EPSILON sensor protocol (RS485, RS422) to Profinet.
- The IF2030/PNET must only be operated within the limits specified in the technical data; see Chap.
.
- The IF2030/PNET must be used in such a way that no persons are endangered or machines and other
material goods are damaged in the event of malfunction or total failure.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
Proper Environment
- Protection class:
IP 20
- Operating temperature: 0 to +50 °C (+32 to +122 °F)
- Storage temperature:
-20 to +70 °C (-4 to +158 °F)
- Humidity:
5 - 95% (non-condensing)
- Ambient pressure:
Atmospheric pressure
Summary of Contents for IF2030/PNET
Page 1: ...Operating Instructions IF2030 PNET...
Page 57: ......
