1.
Warnings
Connect the power supply and the display-/output device in accordance with the
safety regulations for electrical equipment. The power supply must not exceed the
specified limits.
> Danger of injury, damage or destruction of the sensor
Avoid shock and vibration to the sensor. Avoid continuous exposure to dust and spray
on the sensor. Avoid exposure to aggressive materials (e. g. washing agent, penetrat-
ing liquids or similar) on the sensor.
> Damage to or destruction of the sensor
Read the detailed instruction manual before operating the sensor. You will find this
manual on the provided CD or online at www.micro-epsilon.com.
2.
Notes on CE Marking
The following apply to the gapCONTROL 27xx:
- EU directive 2014/30/EU
- EU directive 2011/65/EU, „RoHS“ category 9
The sensor fulfills the specifications of the EMC requirements, if the instructions in the
manual are followed.
3.
Proper Environment
- Protection class:
IP 65 (Only applies to connected output plugs or
protective caps)
- Operating temperature: 0 to +50 °C (+32 to +122 °F), by free circulation of air
- Storage temperature:
-20 to +70 °C ( -4 to +158 °F)
- Humidity:
5 - 95 % (non condensing)
- Vibration:
DIN EN 600068-2-6 (sine shaped)
- Mechanical shock:
DIN EN 60068-2-29
4.
Scope of Delivery of gapCONTROL
27xx
- 1 Sensor gapCONTROL 27xx with integrated controller
- 1 power supply cable PC2700-4,5, length 4,5 m; ODU round connector and free
cable ends
- 1 gapCONTROL Setup Software CD with documentations
- 1 Sensor inspection log / assembly instructions
- 1 Bag of accessories with one ODU male connector 6-pin (RS 422) and two
protective caps for ODU female connector (6- or 8-pin)
Assembly Instructions
gap
CONTROL
2711/2761 (500)
