MICRO-EPSILON CTM-1 Operating Instructions Manual Download Page 78

Page: 78 / 110

Page 78

CompactConnect Software

thermoMETER CT

11.

CompactConnect Software

Insert the CompactConnect installation CD into the according drive on your computer.

If the auto run option is activated the installation wizard will start automatically.
Otherwise, please start CDsetup.exe from the CD-ROM.

Follow the instructions of the wizard until the installation is finished.

The installation wizard will place a launch icon on the desktop and in the start menu.
If you want to uninstall the CompactConnect software from your system, please use the

uninstall

icon in

the start menu.
You will find detailed software manual on the CompactConnect CD.

11.1

System Requirements

- Windows 7, 8 and 10
- At least 128 MByte RAM
- USB Interface
- CD-ROM drive
- Hard disc with at least 30 MByte free space

11.2

Main Features

- Graphical display for temperature measuring values and

automatic data logging for analysis and documentation

- Complete sensor setup and remote controlling
- Adjustment of signal processing functions
- Programming of outputs and functional inputs

Fig. 30 Graphic display main features

Summary of Contents for CTM-1















































































































Search results

Summary of Contents for CTM-1

Reviews:

MICRO-EPSILON CTM-1, Operating Instructions Manual, Page: 78 / 110

Search results

Summary of Contents for CTM-1

Reviews: