Page 15
Installation
colorCONTROL MFA-5
4.2.3
Installation with a Guide Sleeve 1 mm
Mount the optical fiber (ø
1 mm) using a guide sleeve 1 mm in combination with a reducer adapter and
POF 1 mm.
The notch in the guide sleeve holds the optical fiber in position very effectively during the debugging.
Fig. 6 Installation with guide sleeve 1 mm
The optical fiber can be fixed with silicone adhesive after the debugging.
4.2.4
Mounting with a Clamping Collet for Thin Optical Fibers
Optical fibers smaller than ø
1 mm can also be fixed with a clamping collet E39-F9 in addition to the guide
sleeves 1 mm. Fixing with a silicone adhesive is not necessary thereby.
i
The optical fiber is fixed; however, it can be replaced if required.
Fig. 7 Clamping collet E39-F9
