Page 36
Instruction Manual Software
thicknessCONTROL MTS 8202.LLT / 4350127.256
Length unit
The user can select from among mm, µm, inch, or mil
depending on the measuring system set.
Tolerance check
Here you can set which values are additionally set to the
tolerance should be checked. The fixed track value can
be selected.
The LLT area contains settings for the operating mode of the sensors. For example, the
exposure time in milliseconds, the type of reflections recognized and the laser output are
created there. These values significantly influence the number of valid points and can be
changed to predefined values for the thickConSys users; these values are set using the
drop-down box labeled Material.
5.7
View
The
Distance
and
Intensity
checkboxes in the
Show sensor raw data
group
enables to select the sensor values to be displayed in the
Data that belong together are divided into groups and can be expanded/compressed
individually via an arrow.
Summary of Contents for 4350127.256
