Micom P631, Technical Manual, Page: 409 / 638

Parameter Address
Default Min Max Unit Logic Diagram
[spacer]
DTOC1: I>> PSx 076 052 077 052 078 052 079 052
4.00 0.10 30.00 Inom Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: I>> PSx 076 072 077 072 078 072 079 072
4.00 0.10 30.00 Inom
[spacer]
Setting for operate value I>>.
[spacer]
DTOC1: I>>> PSx 076 053 077 053 078 053 079 053
Blocked 0.10 30.00 Inom Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: I>>> PSx 076 163 077 163 078 163 079 163
Blocked 0.10 30.00 Inom
[spacer] Setting for operate value I>>>.
[spacer]
DTOC1: I> dynamic PSx
076 151 077 151 078 151 079 151
1.00 0.10 30.00 Inom Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: I> dynamic PSx 076 161 077 161 078 161 079 161
1.00 0.10 30.00 Inom
[spacer] Setting for operate value I> in dynamic mode. This operate value is only
effective while the hold time for dynamic parameters is elapsing.
[spacer]
DTOC1: I>> dynamic PSx
076 152 077 152 078 152 079 152
1.00 0.10 30.00 Inom Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: I>> dynamic PSx 076 162 077 162 078 162 079 162
1.00 0.10 30.00 Inom
[spacer] Setting for operate value I>> in dynamic mode. This operate value is only
effective while the hold time for dynamic parameters is elapsing.
[spacer]
DTOC1: I>>> dynamic PSx
076 153 077 153 078 153 079 153
1.00 0.10 30.00 Inom Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: I>>> dynamic PSx 076 173 077 173 078 173 079 173
1.00 0.10 30.00 Inom
[spacer] Setting for operate value I>>> in dynamic mode. This operate value is only
effective while the hold time for dynamic parameters is elapsing.
[spacer]
DTOC1: tI> PSx
076 057 077 057 078 057 079 057
1.00 0.00 100.00 s Fig. 3-92, (p. 3-125)
[spacer]
DTOC2: tI> PSx 076 077 077 077 078 077 079 077
1.00 0.00 100.00 s
[spacer] Setting for operate delay I>.
[spacer]
DTOC1: tI>> PSx 076 058 077 058 078 058 079 058
0.50 0.00 100.00 s Fig. 3-92, (p. 3-125)
7 Settings
P631
P631/EN M/R-11-C // P631-310-650 7-109