Michel's CROP CATCHER Instruction Manual Download Page 1

Page: 1 / 4

Patent Pending

Approximate time to complete installation is 1-1/2” hours for two people

Recommended tools required for installing the Crop Catcher:

-9/16” socket

-7/16” socket

-Ratchet

-Extension

-Hammer

-Center Punch

-11/32” Drill Bit

-3/8” Drill

Industries, Ltd.

P.O. Box 119

St. Gregor, Saskatchewan

S0K 3X0 Canada

Ph#(306)366-2184 or Fax#(306)366-2145

Summary of Contents for CROP CATCHER

Page 1: ...ours for two people Recommended tools required for installing the Crop Catcher 9 16 socket 7 16 socket Ratchet Extension Hammer Center Punch 11 32 Drill Bit 3 8 Drill Industries Ltd P O Box 119 St Gre...

Page 2: ...e outside Remove the protective covering on the plastic and wash with soapy water Do not use Glass Cleaner to clean the plastic use the optional Dust Away Plastic Cleaner supplied by Michel s This wil...

Page 3: ...ot over tighten as it may cause damage to the plastic It is easier to tighten them if the Crop Catcher is laying on it s face Refer to Figure 5 Leave the Upright Support Brackets loose so the complete...

Page 4: ...t Support Brackets can now be tightened Do not over tighten as damage may occur to the glass 1 2 Small Gap Figure 7 Note Any time that the position of the Crop Catcher is adjusted ensure that it has s...