12
CWC-GASOLINE Operator's Manual
INSTALLATION & PREPARATION
4. Refer to the Engine Manual supplied with this unit for proper fueling and adjustment procedures.
5. Review the Engine Manual accompanying this pressure washer for correct engine start-up and
maintenance procedures.
NOZZLE REVIEW:
Various nozzles may be quick-connected into the end of the lance to change the
spray pattern or use the detergent feature. When using quick connects (Q.C.), be
certain the connection is securely locked. If not, the high pressure water may shoot
the nozzle from the lance, causing severe injury or serious damage. To determine
spray fan, refer to the actual number stamped on the nozzle. The first two digits
indicate the spray fan in degrees, i.e.: 00=0°, 15=15°, 25=25°, 40=40°, 65=detergent/
low pressure.
WARNING RISK OF INJECTION CAUSING SEVERE INJURY! NEVER LOOK
DIRECTLY AT THE NOZZLE UNLESS IT IS DIS-CONNECTED FROM THE
GUN/LANCE ASSEMBLY!
1. The 0° nozzle (RED): This is a blasting nozzle. It delivers a very
concentrated stream of water. Be cautious when using the
straight narrow stream. It is not recommended for use on painted
or wood surfaces or items attached with adhesive backings.
Uses: Removing weeds from sidewalk cracks, stubborn stains
from concrete, masonry, aluminum and steel, caked mud from
equipment, and cleaning lawn mower undersides.
2. The 15° nozzle (YELLOW): This is a chiseling nozzle. The spray
should be directed at a 45° angle to the surface and used like
a scraper to remove paint, grease and dirt. Uses: Surface
preparation (removing mildew stains and paint chips), cleaning
gutters and downspouts.
3. The 25° nozzle (GREEN): This is a flushing nozzle. This pattern is
best suited for flushing dirt, mud, and grime. Uses: Wet sweeping
leaves from walks, curbs and driveways, cleaning stable floors,
washing swimming pool bottoms, degreasing engines.
4. The 40° nozzle (WHITE): This is a wash nozzle. This wide spray
pattern disperses the water pressure over a large area and is
recommended for moderate washing. Uses: Washing down
aluminum siding, cleaning windows, washing vehicles, spraying sidewalks, driveways and patios.
5. The 65° nozzle (BLACK): This is a low pressure detergent application nozzle. This broad spray pattern
distributes solution over vast areas under low pressure. Uses: Detergent application, misting or rinsing.
NOZZLE CONNECTION:
1. Ensure the trigger gun is locked in the OFF position.
2. The quick-connect nozzle should be disconnected from the gun assembly at this time. As shown in the
drawing below, retract the locking ring on the quick-connect fitting to remove the nozzle.
WARNING: RISK OF SEVERE INJURY! THE TRIGGER GUN SHOULD ALWAYS BE LOCKED IN THE
OFF POSITION WHEN NOT IN USE!
WATER SUPPLY:
1. Select a water supply hose which is a quality grade of garden hose measuring at least 3/4" ID and no
longer than 50 feet.