CA-Series Operator’s Manual
3
introduction
Congratulations on the purchase of your new cold water pressure washer! You can be assured your cold water pressure
washer was constructed with the highest level of precision and accuracy. Each component has been rigorously tested
by technicians to ensure the quality, endurance and performance of this unit.
This operator’s manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from
your new cold water pressure washer. The contents of this manual are based on the latest product information available
at the time of publication. Mi-T-M
®
reserves the right to make changes in price, color, materials, equipment, specifications
or models at any time without notice.
! important !
tHese paragrapHs are surrounded by a “safety alert boX”. tHis boX is used
to designate and empHasize safety warnings tHat must be followed wHen
operating tHis pressure wasHer. accompanying tHe safety warnings are
“signal words” wHicH designate tHe degree or level of Hazard seriousness.
tHe “signal words” used in tHis manual are as follows:
DANGER:
indicates an imminently Hazardous situation wHicH, if not
avoided, will result in deatH or serious injury.
WARNING:
indicates a potentially Hazardous situation wHicH, if not
avoided, could result in deatH or serious injury.
CAUTION:
indicates a potentially Hazardous situation wHicH, if not
avoided may result in minor or moderate injury.
tHe symbols set to tHe left of tHis paragrapH are “safety alert symbols”.
tHese symbols are used to call attention to items or procedures tHat could
be dangerous to you or otHer persons using tHis equipment.
always provide a copy of tHis manual to anyone using tHis equipment. read
all instructions before operating tHis pressure wasHer and especially
point out tHe “safety warnings” to prevent tHe possibility of personal
injury to tHe operator.
Once the unit has been uncrated, immediately write in the serial number of your unit in the space provided below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If something appears to be damaged, file a claim with the
transportation company immediately. Be sure that all damaged parts are replaced and that the mechanical problems
are corrected prior to operation of the unit. If you require service, contact a Mi-T-M Customer Service Representative
at 800-553-9053.
Please have the following information available for all service calls:
.
Model Number
2.
Serial Number
3.
Date and Place of Purchase
Mi-T-M
®
Corporation
8650 Enterprise Drive
Peosta, IA 52068-0050
