PUSH
PUSH Dimming
Short press PUSH switch:
Turn ON/OFF light
Stepless dimming brightness.
Long press PUSH switch:
Long press and release your finger, then repeat long pressing
to increase or decrease brightness.
App turn on and off “Do Not Disturb” mode instruc�on
6). “Do Not Disturb” mode is ac�vated and shut down (default ac�vated)
Turn on “Do Not Disturb” mode (wide using in the area which have power failure
frequently to save energy)
Press “OFF” bu�on three �mes within three seconds and press “ON”
bu�on three �mes, Ac�vated successfully once led light flashes four �mes
quickly.
A�en�on:
Do not disturb mode is ac�vated
1. When the light is OFF status (For example: Use app or remote to turn off light)
The light is ON status once you turn off and turn on power one �me.
2. When the light is ON status
The light is OFF status once you turn off power and turn on again.
(User must turn off and turn on power twice �mes to ac�vate light
or use APP / remote to ac�vate light)
Press “ON” bu�on three �mes within three seconds and press “OFF”
bu�on three �mes, closed successfully once led light flashes four �mes
slowly.
A�en�on:
The light will be always “ON” status if you turn on and turn off
power once user closed “Do Not Disturb” mode.
Turn off “Do
Not Disturb
” mode:
Turn on “Do Not Disturb
” mode:
2.4G RF Remote turn on and turn off instruc�on
⸺ 6 ⸺
