MHSC 400BBNSC Installation & Operating Instructions Manual Download Page 1

B-Vent Series
Natural Vent Gas Fireplace

4037
BBV SBV cover 
9/08

WARNING

IF THE INFORMATION IN THESE INSTRUCTIONS IS 
NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION 
MAY RESULT CAUSING PROPERTY DAMAGE, PER-
SONAL INJURY OR LOSS OF LIFE.

— Do not store or use gasoline or other flam-

mable  vapors  and  liquids  in  the  vicinity  of 
this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.
•  Do not touch any electrical switch; do not 

use any phone in your building.

•  Immediately call your gas supplier from a 

neighbor’s phone. Follow the gas suppli-
er’s instructions.

•  If you cannot reach your gas supplier, call 

the fire department.

— Installation and service must be performed 

by a qualified installer, service agency or the 
gas supplier.

WARNING:  Improper  installation,  adjustment, 
alteration, services or maintenance can cause 
injury or property damage. Refer to this man-
ual.  For  assistance  or  additional  information 
consult a qualified installer, service agency or 
the gas supplier.

DUE  TO  HIGH  TEMPERATURES,  THE  APPLI-
ANCE  SHOULD  BE  LOCATED  OUT  OF  TRAF-
FIC AND AWAY FROM FURNITURE AND DRAP-
ERIES.
CHILDREN AND ADULTS SHOULD BE ALERT-
ED  TO  THE  HAZARDS  OF  HIGH  SURFACE 
TEMPERATURE AND SHOULD STAY AWAY TO 
AVOID BURNS OR CLOTHING IGNITION.
YOUNG CHILDREN SHOULD BE SUPERVISED 
WHEN THEY ARE IN THE SAME ROOM AS THE 
APPLIANCE.
CLOTHING  OR  OTHER  FLAMMABLE  MATE-
RIAL SHOULD NOT BE PLACED ON OR NEAR 
THE APPLIANCE.
KEEP  THE  ROOM  AREA  CLEAR  AND  FREE 
FROM  COMBUSTIBLE  MATERIALS,  GASO-
LINE AND OTHER FLAMMABLE VAPORS AND 
LIQUIDS.

Models:
400BBVNV/PV/NE/PE/NSC/PSC, 
400SBVNV/PV/NE/PE/NSC/PSC, 
500SBVNV/PV/NE/PE/NSC/PSC

D

  

   ev  

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future refer-
ence.

Installation & Operating 
Instructions

Summary of Contents for 400BBNSC

















































Reviews: