
8 Instructions RME
English
RME series tubular motors are manufactured by Nice S.p.a. (TV) I. The company Mhouse S.r.l. is a member of the same group as Nice S.p.a.
NICE S.p.a. observes a continuous improvement policy and reserves the right to modify the technical specifications at any time without notice. In such
cases specified functionality and intended use will not be affected.
Note: all technical specifications refer to a temperature of 20°C.
11 Technical Specifications
RME tubular motor
RME15
RME30
RME45
Type
Tubular geared motor for roller shutters, awnings and solar screens with built-in controller and radio receiver
Technology
Asynchronous single-phase motor with 3-stage planetary gear unit; electronic type limit sensing
Power cable
Length approx. 3 m, cable type H05VV-F (only for indoors use)
Power supply
230Vac (+10% -15%) 50Hz
Rated current
0,8A
1,3A
1,15A
Torque
15Nm
30Nm
45Nm
Weight lifted (with Ø60 mm roller)
28Kg
56Kg
90Kg
Speed
16 rpm
16 rpm
12 rpm
Maximum number of turns
43
43
30
Precision (resolution) of the electronic limit switch
better than 0,5°
better than 0,5°
better than 0,4°
Continuous operating time
4 minutes maximum
Duty cycle
Maximum 20% (for example, 1 minute of operation must be followed by a pause of at least 5 minutes)
Remote control facility
With TX3 or TX4 transmitters
Transmitter encoding
64 bit rolling code (18 billion billion combinations)
Number of transmitters that can be stored
Up to 30 (if stored in mode I)
Reception frequency
433.92 Mhz
Receiver sensitivity
Better than 0.6µV (with direct coupling)
Transmitter range
Estimated at 50-100m in optimal open field conditions; 20-30m indoors
(the range varies in the presence of obstacles and electromagnetic interference).
Environmental operating temperature
-20 ÷ 55°C
Use in acidic, saline or potentially explosive
atmospheres
No
Protection rating
IP44
Dimensions / weight
Tube Ø45 mm; length 570 mm, approx. weight 2700g
Transmitter TX3
Type:
Radio transmitters for automations of awnings and roller shutters, etc.
Technology:
Radio carrier AM OOK coded modulation
Frequency:
433.92 Mhz
Encoding:
64 bit rolling code (18 billion billion combinations)
Keys:
3, each key can be utilized for the various command functions of the same motor,
or to command different motors or automations that are compatible with the encoding
Irradiated power:
approx 0.0001W
Power supply:
6V +20% –40% with 2 Lithium batteries type CR2016
Battery life:
3 years, estimated on the basis of 10 commands/day lasting 1s at 20°C
(battery efficiency falls at lower temperatures)
Environmental operating temperature:
-20 ÷ 55°C
Use in acidic, saline or potentially explosive
atmosphere:
No
Protection rating:
IP40 (use in the home or protected environments)
Dimensions / weight:
720 x 31 h 11mm / 18g
CE declaration of conformity in accordance with Directives 73/23/EEC; 89/336/EEC and 1999/5/CE
RME15;
RME 30; RME45 and TX3 are produced by NICE S.p.a. (TV) I; MHOUSE S.r.l. is a member of the Nice S.p.a. group.
Number: 191/RME
Revision: 0
The undersigned Lauro Buoro, Managing Director, declares under his own responsibility that the product:
Manufacturer's name:
NICE s.p.a.
Address:
Via Pezza Alta 13, 31046 Z.I. Rustignè, Oderzo (TV) Italia
Type:
Tubular geared motor for roller shutters, awnings and solar screens with integral controller and radio receiver
Models:
RME15, RME30, RME45
Accessories:
Radio remote control TX3 or TX4
Complies with the requirements of the following community directives as amended by Directive 93/68/EEC of the Council of 22 July 1993:
• 73/23/EEC; DIRECTIVE 73/23/EEC OF THE COUNCIL of 19 February 1973 concerning the harmonisation of Member States' legislation relative to
electrical material destined to be used within specified voltage limits
• 89/336/EEC: DIRECTIVE 89/336/EEC OF THE COUNCIL of 3 May 1989, for the harmonization of Member States' legislation concerning electro-
magnetic compatibility.
In addition, it complies with the basic requirements of article 3 of the following community directive, for the uses for which the products are designed:
• 1999/5/EC; DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT OF THE COUNCIL of 9 March 1999 concerning radio equipment and tele-
communications terminal equipment and the reciprocal acknowledgement of their compliance.
Oderzo, 3 July 2004
Lauro Buoro
(Managing Director)
12 EC Declaration of Conformity