MH RYZ 50 Cross C, Service Manual

Page: 70 / 92

RYZ
SERVICING THE MACHINE
REMOVING THE BATTERY
Remove the seat – see “Removing the seat” in Section 4
(CHASSIS)
Disconnect and remove the battery.
REMOVING THE STARTER MOTOR RELAY
Remove the seat – see “Removing the seat” in Section
4 (CHASSIS)
Disconnect the battery.
Remove the fuel tank – see “Removing the fuel tank” in Section
4 “CHASSIS”.
Disconnect and remove the starter motor relay (1).
REMOVING THE VOLTAGE REGULA-
TOR/TURN INDICATOR CONTROLLER
Remove the seat – see “Removing the seat” in Section
4 (CHASSIS)
Disconnect the battery.
Remove the fuel tank – see “Removing the fuel tank” in Section
4 “CHASSIS”.
Remove the two securing bolts.
Disconnect and remove the regulator (2).
N.B.:
The same device has two functions: voltage regulator and
turn indicator controller.
1)
2)
1)
2)
3)
4)
1)
2)
3)
4)
5)
6-2 ELECTRICAL SYSTEM
6
WARNING:
First disconnect the negative cable and then the positive
cable.
WARNING:
First disconnect the negative cable and then the positive
cable.
WARNING:
First disconnect the negative cable and then the positive
cable.