MGI MGISTP-3000, User Manual

Page: 11 / 51

Saf
ety
4
z
Only the power cord supplied by the manufacturer can be used.
z
Prepare the laboratory and power supply according to Getting started on
Page 17.
z
Ensure that the input voltage meets the device requirement.
Mechanical safety
z
To avoid personal injury, place the device on a level surface and ensure that
the device cannot be easily moved.
z
Do not stretch out your hands or head into the device during operation.
Otherwise, it might cause personal injury.
Components safety
Only the software that have been provided by the manufacturer can be
installed and used on the computer. Unknown software might interfere
with normal device functions, or even cause data loss. If you need to install
antivirus software, contact the technical support in advance.
z
If the fuse blew, replace the fuse with the specified type. For details,
contact the technical support.
z
Do not uninstall the control software by yourself. If any problem occurs
during software operation, contact the technical support.
z
Ensure that the peripheral devices meet the IEC/EN 60950-1 standards.
Biological safety
z
Samples in the sample tubes might cause cross contamination through
contact with the skin, eyes, and mucosa. Follow the safety standards of your
laboratory and wear protective equipment (such as laboratory coat, and
disposable bouffant cap, protective glasses, mask, gloves, and shoe covers).