SPREADER BEAM OVERVIEW
The MGF S80 Spreader Beam is a modular system which can lift up to 80t and is available
in lengths from 1-14m with increments as small as 0.25m. The capacities for various
lengths are stated below. For smaller increments in lengths please consult an MGF
representative.
The system includes two End Attachments (D) which are bolted onto the end of one or more
strut extensions (E) to customise the length of the beam. The system comes with Drop
Links (B) on each end, which connect the Upper (A) and Lower Shackles (C) to the
End Attachment (D). Endless round slings available for all lengths.
S80 SPREADER BEAM
KEY PRODUCT FEATURES
•
Rated at 80 tonnes WLL up to 8.0 metre span (30° STV β). See load table for
alternate spans and angles
•
Sling to Vertical (STV) angle, β, 45° or less
•
End Attachments and Drop Links are rated at 40 tonnes WLL each (80t combined)
•
240Nm min. torque required for M20 bolts (30mm socket/spanner)
A
B
C
D
E
F
β = SLING TO VERTICAL ANGLE
β
β
SPAN
Figure 1 - Typical Beam Setup
USER
GUIDE
SEC
TION
1
4
S8
0 SPREADER
BEAM
