Meyra Ortopedia 1.054, Operating Manual

Page: 21 / 56

1
5
21
6. Switch the operating module on.
Press the On/Off-key (5) on the control
panel of the operating module.
☞
Therefore observe chapter Switch-
ing the operating module on on
page 15.
PRE-OPERATION CHECKS
Before starting to drive, the following should
be checked:
1. The technical condition of the electric
travelling wheelchair.
☞
Check screwed connections, e. g.
through slight movements of the
components, like arm supports,
back support.
☞
Through a general visual check.
2. The battery charging condition.
3. The setting of the preselected final
speed.
☞
Therefore observe chapter
Pre-se-
lectable maximum speed
on
page 17.
Battery charging condition
After activation the battery gauge (1) shows
the battery charging condition.
☞
The displayed value depends on the
surrounding temperature, the age of
the battery as well as their type of strain
and is therefore to be observed with
limitations.
☞
The lithium ion batteries should be
charged immediately when the red LED
of the battery gauge is blinking.
☞
Therefore observe chapter Fault correc-
tion on page 40.
☞ View chapter Battery voltage on
page 16.