14
LOADING INTO THE
TRANSPORT VEHICLE
Attention:
For the transport in vehicles, you must
leave the PROFI 3 and occupy a suita-
ble seat in the vehicle. It is forbidden
to remain seated in the PROFI 3 dur-
ing vehicle transportation. – Accidents
produce forces which the PROFI 3 is
not designed to handle and therefore
seriously endanger you as occupant.
Before transporting the wheelchair,
ask your car dealer how to secure it
without risk to the existing fixtures or
other safety fittings!
Suitable fixing points can usually be
found in the car and in the vehicle
operating manual.
Assuming that the PROFI 3 is located in
the transport vehicle, you or a helper
should carry out the following:
– Operate parking brakes.
– Stow any parts removed from the
PROFI 3 safely and protectively.
– Remove bags, walking sticks and oth-
er items not belonging to the wheel-
chair and stow these safely.
– Secure the wheelchair by way of
elasticated straps.
Note!
The elastic straps are only to be se-
cured to the appropriate fastening
points of the vehicle and the frame of
the PROFI 3 (Fig.45+46)!
TECHNICAL DATA
Tyre filling pressure:
The following pressure values can be
taken as standard values:
Driving wheel:
Code 486
Standard
= 4.0 bar
Code 488
Ultra smooth running = 6.0 bar
Code 496
High pressure
= 8.0 bar
Code 485
Indoor sport
=11.0 bar
Always observe the maximum tyre fill
pressure indicated on the tyre cover!
The product conforms with the
EC Directive 93/42/EEC
(MDD) for medical products
