manualshive.com logo in svg

Meyra 1.617, Operating Manual, Page: 7 / 56

Share
Download
Meyra 1.617 Operating Manual Download Page 7

   7

INDICATIONS

If the following indications occur we rec-
ommend the application of this mobility 
product:

 

☞

Walking disability resp. extremely lim-
ited walking ability as part of the ba-
sic need to move around in your own 
home.

 

☞

The need to be able to leave home for 
a short walk in fresh air or in order to 
reach the places, commonly in the pe-
rimeter of the home, required to fulfil 
basic needs.

SPECIFICATIONS

The electric wheelchair is an environ-
ment-friendly electronic vehicle. It was de-
veloped to extend the mobility of persons 
with health-related or age-related restric-
tions.

 

☞

The model has been assigned the 'Use 
Class B' as per the EN12184 standard.

 

☞

 This model was developed for adults 
and adolescents. 

ACCEPTANCE

All products are checked for faults in the 
factory and packed in special boxes.

 

☞

Note:

However, we request that you check 
the vehicle for possible transport dam-
age immediately on receipt – prefera-
bly in the presence of the carrier.

 

☞

 

The packaging of the wheelchair 
should be stored for a further transport 
that might become necessary.

Summary of Contents for 1.617

























































Reviews:

No comments