manualshive.com logo in svg

Meyra 1.617, Operating Manual, Page: 12 / 56

Share
Download
Meyra 1.617 Operating Manual Download Page 12

1

2

12   

Locking the brakes

To engage the brakes swivel the selection 
lever drive-/push mode on both sides down 
as far as possible into drive mode [1].

 

☞

Activation of the selection lever is in-
tended for an accompanying person.

!

 

Attention:

It should not be possible to push the 
electric wheelchair forward when the 
brakes are engaged.

Releasing the brakes

To loosen the brakes swivel the selection 
lever drive-/push mode on both sides up as 
far as possible into push mode [2].

 

☞

Activation of the selection lever is in-
tended for an accompanying person.

!

 

Attention:

Only transfer into or out of the electric 
wheelchair when the electric wheel-
chair is switched off and the selection 
lever drive-/push mode on both sides is 
in drive mode!

• 

An unintentional movement of the joy-
sticks (driving and steering lever) can 
otherwise lead to an uncontrolled start 
of the electric wheelchair! – Danger of 
accident!

Summary of Contents for 1.617

























































Reviews:

No comments