Meyra 1.610, Maintenance And Service Manual

Page: 98 / 104

98
Maintenance checklist of the annual maintenance jobs
Brakes
❑ Checked the function of the brakes.
❑
The maximum braking distance corresponds to EN 12184.
Oil/Grease
❑
Checked turning points and bearing areas of operating levers and moveable parts for easy function-
ing.
❑ Checked bowden cables for function and easy running.
Final check
❑
Checked the lighting and signalling devices.
❑
Conducted brake-/steering-/driving test on inclinations and slopes.
❑ Conducted a general function test of the mechanical adjustment units.
❑ Conducted driving test.
❑
The inspection certificate filled out in the operating manual.
DIN norms and guidelines
The torque according to DIN for screwed connections can
be extracted from the table at the side.
Tyres
Filling pressure front: ..................min. 2.5 / max. 3.5 bar (35 psi)
Filling pressure rear: .....................min. 2.5 / max. 3.5 bar (35 psi)
Minimal profile depth acc. to STVO: ................................... 1.5 mm
Items with order number
Loctite 243 (medium hard) ............................................205 638 800
Torque according to DIN for screwed
connections
Thread diameter Tightening torque
M 4 3 Nm
M 5 5 Nm
M 6 10 Nm
M 8 25 Nm
M 10 50 Nm
M 12 85 Nm
W e m o v e p e o p l e .