Meyra 1.610, Maintenance And Service Manual

Page: 96 / 104

96
Maintenance checklist of the annual maintenance jobs
Preparation for visual check
❑
Removed seat and back support elements, leg supports, arm support units. If necessary, clean the
vehicle or the modules before the visual check.
Visual check coachwork
❑
Checked the frame, add-on components and accessories for damage, corrosion and damaged
paintwork.
❑ Covers and revetments are free of dents and tears.
❑ Checked function of the designated attachment points such as screws or velcro straps.
General checks
❑
Checked the securing screws for tightness.
❑
Checked the securing of all add-on parts and elements.
❑ Checked the attachment of the plastic parts, handgrips, add-on parts and accessories.
❑ Checked bowden cables for damages.
Chassis
❑ Checked steering and drive wheel attachment.
❑
Checked the quick release axle, if existent.
❑
Wear of axle bushing: The axles of the drive wheels do not show radial run-out and run easily.
❑ Wheel forks are not bent or torn.
❑
Checked the condition, functioning and smooth-operation of the steering wheel suspension.
❑
Screws, with which the drive is attached to the vehicle, are tightened with the torque according to
DIN.
Tyres and rims
❑
Tread pattern depth of the tyres is greater than 1.5 mm.
❑ The tyres are free of damages or alien objects and are not porous.
❑
Checked tyre pressure front and rear.
❑
Hubs do not show tears or raptures.
❑ The lateral lag of the rims is max. 2 mm.
❑ Wheel attachment screws are tightened with torque according to DIN.