86
Adjusting the front seat height, model 1.610 / 1.611 /
1.615
In order to adjust the front seat height the corresponding
screw (Z) needs to be removed.
The hole in the telescopic tube [1] (column Pos.) for the
screw [Z] can be determined from the table <
Front seat
height
>, depending on the steering wheel size, the rear seat
frame position [2] and the position of the horizontal beam
[3] for the corresponding front seat height.
The bold printed figures for height (in mm) within the table
correspond to the manufacturer setting.
Pic. [1] shows the telescopic tube with marks and holes for
an exact adjustment.
☞
Symbol descriptions:
=
Mark for the hole ( )
( )
Pos. of the hole
= (S) Mark for the service setting
(S)
Hole for the service setting
Table: Front seat height
Front seat height in (mm) with 3.5° seat inclina-
tion
Steering wheel
8"
ø 203 mm
Steering wheel
9"
ø 229 mm
Steering wheel
10"
ø 254 mm
rear seat frame position [2] – position
horizontal beam [3]
Pos.
[1]
A -
a
B -
b
C -
c
A -
a
B -
b
C -
c
A -
a
B -
b
C -
c
1
460
2
440
500
3
430
480
530
4
470
510
5
500
6
☞
Bring the center hole of the horizontal beam in line with
the corresponding hole in the seat frame [3]. The hole
of pos. b corresponds to dimension X = 72.5 mm. The
further holes are 60 mm in front or back.
A
B
C
a
b
c
= (1)
= (2)
= (3)
(1) / = (4)
(2) / = (5)
(3) / = (6)
(4) / = (7)
(5) / = (8)
(6) / = (9)
(7)
(8)
(9)
= (S)
(S)
Z
X
1
2
3
Summary of Contents for 1.610
