Meyra 1.610, Maintenance And Service Manual, Page: 39 / 104

39
Adjusting the headlights
In order to adjust the headlight, loosen the attachment
screw (3) and adjust the lighting fixture (1)+(2) accordingly.
Replacing the lighting fixture
A defective lighting fixture can only be exchanged com-
pletely.
☞
For safe identification of the defect (lighting fixture or
lighting module) switch the plugs on the lighting mod-
ule for left, resp. right lighting.
☞
The defect switches sides. – The lighting module is
defective.
☞
The defect remains on the same side. – The lighting
fixture is defective.
Replacing the headlight / front turn signal
Model 1.610 / 1.611 / 1.612 / 1.614 / 1.615 / 1.616:
In order to replace the headlight / front turn signal, first
disconnect the electric and loosen the cable clips, then re-
move the attachment screw (1).
After assembly of the new headlight / front turn signal the
electric connection needs to be re-established.
☞
In doing so place the cable in a protected manner and
secure it in place [2]+[3].
1
2
3