3
3
2
1
30
SHOULDER STRAP
The shoulder strap (1) serves for additional
fixation of a person sitting the wheelchair.
–
Additional stabilisation of the sitting
position.
–
Prevents falling forward.
–
Continuous adjustment to suit the us-
er’s needs.
The shoulder strap is screwed on, from the
outer side, at the respective back support
holder.
!
Attention:
The shoulder strap is not part of the re-
taining system for the wheelchair and/
or user during transport in a motor ve-
hicle.
Fastening the shoulder strap
Pull both belt halves to the front and slide
the catch halves together so that they latch
together. Then carry out a pull test.
!
Attention:
Make sure that no objects are trapped
between belt and the body! – Thus you
avoid painful pressure points.
To open the shoulder strap the red locking
button (2) is pressed down.
Adjustment of belt length
☞
Note:
The shoulder strap should not be
pulled too tight.
To adjust the length hold the respective
strap buckle (3) at a right angle to the strap
and position it accordingly.
