Meyra 1.155 NANO, Operating Manual

Page: 14 / 44

3
1
2
14
Footboard, model 1.155 / 1.156
Have the adjustments carried out in your
specialist workshop.
The footboard [1] can be adjusted height,
angle and depth to accommodate your in-
dividual requirements.
Model 1.156
The footboard is to be folded up for enter-
ing or exiting the wheelchair [2].
☞ Observe jamming point between foot-
board and frame tube!
– Remove both feet from the foot plate.
– Remove lower calf belt, if present.
☞ Therefore observe chapter Calf belt
on page 13.
☞
Before starting to drive the footboard
need to be folded back down [1] and
the calf belt attached.
Folding up the footboard
In order to fold up the footboard lift the
loose end of the footboard as far as possible
[2].
Folding the footboard down
In order to fold down the footboard, lower
the loose end of the footboard as far as pos-
sible down onto the footboard bracket [3].