4
2
1
3
5
24
Quick.release.axle.with.tetra.lock-
ing.device.Code.697
The drive wheels can be removed and
reassembled without any tools.
Removing the drive wheel:
– First turn the activation wheel (1)
of the quick release axle as far as
possible about 90° in the direction
of the rim [2].
☞
The marker (3) faces in the direc-
tion of the rim when the quick re-
lease axle is released [2].
– Pull off the drive wheel [4].
Attaching the drive wheel:
– If necessary previously turn the ac-
tivation wheel (1) as far as possible
in the direction of the rim [2].
– Slide the axle of the drive wheel as
far as possible into the axle recep-
tacle.
– Afterwards turn the activation
wheel (1) of the quick release axle
by 90° in the direction of the cent-
er of the wheel hub (5).
☞
The quick release axle is locked
when the marker (3) is located cen-
tred to the wheel hub (5).