Meyer V-FORCE 7400 Series, Operator And Parts Manual, Page: 27 / 88

PB-74/7500 - 27 -
MONTHLY LUBRICATION
Keep the (3) gearboxes 1/2 full of liquid gear
grease at all times, capacity approximately 30 oz.
Check regularly for any observable leakage. If leakage
is excessive, replace required input/output shaft seals
as needed. Lubricate with a “Semi-Fluid, EP Lithium
Base, Gear Grease”.
Clean and repack the wheel hubs with axle
grease annually. Grease hub through zerk in hub
monthly. Hub from factory has bearings packed but
hub is not fully loaded with grease. Be careful not to
over grease and force seal out of back side of hub.
Equivalent Viscosity of ISO-VG Grades at 104°F and SAE Gear Lube Grades
L12 L13
ISO-VG Grade SAE Gear Lube Grade
46 75W
100 80W-90
220 90
460 85W-140
1500 250
(5 ROLLER CHAINS)
(SHIELDS REMOVED)