Meyer UMS-1XP, Operating Instructions Manual

Page: 19 / 52

ULTRA XP OPERATING INSTRUCTIONS
19
MOUNTING YOKES
The following mounting yokes are available for the UPJ-1XP, UPJunior-XP, UPM-1XP, and UPM-2XP loudspeakers. The
yokes suspend a single loudspeaker and allow a wide range of horizontal and vertical adjustment. The yokes for the
UPJ-1XP and UPJunior-XP attach to the bottom end plate. The yokes for the UPM-1XP and UPM-2XP attach to the top and
bottom nut plates and include both
3/8”-16 and M10 hardware.
A “C” or “G” hanging clamp and steel safety cable (not included)
are required to suspend the loudspeakers with yokes.
Ultra XP Mounting Yokes
Model Supported
Loudspeakers
Maximum Num-
ber of Cabinets
Loudspeaker
Attachment
Mounting Options/Notes
MYA-UPJ
(PN 40.134.035.01)
UPJ-1P
UPJ-1XP
1 Bottom
■
Requires “C” or “G” hanging clamp and
steel safety cable
■
Accommodates hanging clamps with
standard 1/2” (12 mm) bolts
MYA-UPJunior
(PN 40.173.044.01)
UPJunior
UPJunior-XP
1 Bottom
■
Requires “C” or “G” hanging clamp and
steel safety cable
■
Accommodates hanging clamps with
standard 1/2” (12 mm) bolts
MYA-UPM
(PN 40.084.038.01)
UPM-1P,
UPM-2P,
UPM-1XP,
UPM-2XP
1 Top/Bottom
■
Requires “C” or “G” hanging clamp and
steel safety cable
■
Accommodates hanging clamps with
standard 1/2” (12 mm) bolts
■
Includes both 3/8”-16 and M10 hard-
ware
■
Secure the yoke by tightening the bot-
tom bolt first and then the top
■
Do not overtorque the bolts as this may
damage the cabinet
Figure 2: MYA-UPJ Mounting Yoke (Left), MYA-UPJunior Mounting Yoke (Center), MYA-UPM Mounting Yoke (Right)