Meyer Manufacturing Corporation
- 32 -
PB-MIXER-TR-MECH
7.5 MIXER TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE SOLUTIONS
Forage is cut too short
•
Reduce the initial processing time.
•
Adjust hay stops to a less aggressive or neutral position. (See Section 8.2.5)
•
Reduce total loading time.
•
Reduce the mixer RPM to limit aggressiveness in processing.
•
Modify the knife type, quantity, setting or placement. (See Section 8.2.4)
•
Shift into “Low”.
Spillage is Occurring
•
Reduce load size.
•
Reduce truck and/or mixer RPM.
•
Make sure machine is level.
•
The load size may need to be reduced until the unit is polished inside.
•
Adjust hay stops to a less aggressive or neutral position. (See Section 8.2.5)
•
Adjust knives to a less aggressive position. (See Section 8.2.4)
•
If spillage still occurs, the optional side extensions or hay retention ring may
need to be installed.
Requiring High Horsepower
•
Reduce load size.
•
Adjust hay stops to a less aggressive or neutral position. (See Section 8.2.5)
•
The load size may need to be reduced until the unit is polished inside.
•
Modify the knife type, quantity, setting, or placement. (See Section 8.2.4)
•
Shift into “Low”.
Dead Spots
•
The load size may need to be reduced until the unit is polished inside.
•
The auger scraper may need to be adjusted. (See Section 8.2.1)
Digital Scale Indicator
•
Refer to scale manufacturer’s operator manual for operation and maintenance.
•
See Section 6.7.1
Summary of Contents for F585 2018
