Meyer BOSS RT FATBOY 1026RT RR Owner'S/Operator'S Manual Download Page 33 | Manualshive

Page: 33 / 44

background image

1-800-325-9103

PB-FATBOY

- 33 -

www.meyermfg.com

8.0 MAINTENANCE

8.1 LUBRICATION

NOTE: Use a grease type that is composed of a high quality lithium complex or better, unless otherwise stated.

We recommend using a #1 grade in colder temperatures or a #2 grade in warmer temperatures.

DAILY

or every

8-10 loads

:

•

Grease the four (4) main apron bearings (Item 1). Over-greasing
is not possible.

•

Apply oil to the apron chains and inspect all forage box
components for wear or damage. Repair and replace
components as necessary.

•

Grease the hitch (Item 2) (both sides).

Shutoff and lockout power before performing machine service,
adjusting, maintaining, or clearing an obstruction from this machine.
Refer to section 5.3 SHUTOFF & LOCKOUT POWER.

Fluid such as hydraulic fluid, grease, etc. must be disposed of in an
environmentally safe manner. Some regulations require that certain
spills and leaks on the ground must be cleaned in a specific manner.
See local, state and federal regulations for the correct disposal.

The PB-ADR-B manual should be used in conjunction with this
manual.

Main Apron Bearing Lubrication Locations

1

1

1

Hitch Lubrication Locations

2

«
...
31
32
33
34
35
...
»

Summary of Contents for BOSS RT FATBOY 1026RT RR













































Reviews:

No comments

Related manuals for BOSS RT FATBOY 1026RT RR

Brand: Kellfri Pages: 24

Brand: Landa Pages: 101

Brand: Lynx Pages: 75

LYNX RADIEN UTILITY ACE 2022 Series

Brand: BRP Pages: 252

Brand: Daedong Pages: 3

Brand: Polaris Pages: 690

Brand: Makita Pages: 128

Brand: Argo Pages: 64

Brand: Humbaur Pages: 4

Brand: Landoll Pages: 62

Brand: Kellfri Pages: 8

Brand: Erde Pages: 6

Brand: Renegade Pages: 19

Brand: Range Road Pages: 6

Brand: E-Z-GO Pages: 188

Brand: Tracker Off-Road Pages: 68

Brand: Tracker Pages: 156

Brand: Ski-Doo Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands