A.
Press down button until float light
turns blue.
B. Push lift arm down until there is slack in the chain.
C. Remove crankstand from lift frame.
D. Attach crankstand to a-frame
E. Adjust crankstand until
crankstand comes into contact
with the ground and then turn
1 to 2 revolutions.
F. While slightly pushing the lift frame towards vehicle pull handles on either side to disengage
pins then twist until the leg locks the pin in the open position.
G. Disconnect one piece electrical
plug and install weather cover on
male end.
H. Back vehicle away from plow
assembly.
Meyer Products assumes
no responsibility for
installations not made in
accordance with these
instructions.
(9)
For Mounting and Dis-mounting instructional video’s please visit www.youtube.com/meyerproducts
Dis-Mount Plow From Vehicle
