Meyer Sound MPS-488HP, Operating Instructions Manual, Page: 17 / 36

MPS-488HP OPERATING INSTRUCTIONS
17
DISCOVERING THE MPS-488HP
The MPS-488HP is discovered in Compass in the same
manner as loudspeakers. To discover the MPS-488HP, it
must be powered on and connected to the network. The
MPS-488HP is added to the network as four loudspeaker
nodes, regardless of the number of loudspeakers connected
to it.
MUTING, SOLOING, AND WINKING THE
MPS-488HP
The MPS-488HP icon in the RMS program includes global
Mute and Solo buttons at the bottom of the icon that affect
all loudspeakers connected to the MPS-488HP, as well as a
Wink button for identifying the power supply. The
MPS-488HP icon also includes individual Mute buttons for
each loudspeaker channel.
NOTE: Because 48 V DC loudspeakers store
DC power to deliver high power peaks with
light cable gauges and long cable runs, muting and
unmuting for these loudspeakers incurs a delay to
ramp down or ramp up their power supplies. This
results in less responsive muting and unmuting for
the 48 V DC loudspeakers when compared to other
self-powered loudspeakers.