-12-
5. Peak Holding
Pressing
HOLD
key continually in the course of measurement (More than
3 seconds), the leaker will display
PEHd
and capture current peak
values of lines in this period of time; release the key, it then will return to
measuring state.
6. Hold, Storage and Access Reading
1
）
Pressing
HOLD
key for a short time in the course of measurement (less
than 3 seconds),
DH
symbol will display, the leaker will hold current
Attention! For your safety, when measuring heavy
current, after confirmed the completion of correct
operating test, please move the leaker away from
measured conductor.
In locations with difficulty to read out data, please use
the data holding function. If [DH] symbol displayed,
please discharge data holding state first, and then do
the test.