Metz 24 AF-1 C, Operating Instructions Manual

Page: 104 / 164

8 Maintenance and care
Remove any grime and dust with a soft, dry or silicon-treated
cloth. Never use detergents that could damage plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flash unit undergoes a
physical change when the flash unit is not switched on for
prolonged periods of time. For this reason it is necessary to
switch on the mecablitz for approx. 10 minutes every 3
months. The batteries must supply sufficient power for flash
readiness to be indicated within 1 minute after the mecablitz
was switched on.
Metz does not accept any liability for faulty functions
or damage to the mecablitz caused by the use of
accessories from other manufacturers!
9 Technical data
The flash unit can be updated by the METZ customer
service department.
Tilting range and locking positions of flash head:
vertically 45° - 60° - 75° - 90°
Flash duration: 1/500 s - 1/30,000 s
Colour temperature: approx. 5500 K
Synchronisation: Low-voltage ignition
Number of flashes (at full light output):
approx. 200 with high-capacity alkaline manganese batteries
approx. 250 with NiMH batteries (2100 mAh)
☞
104
ķ
709 47 0261.A2 24AF-1CNOPS 14.12.2010 13:27 Uhr Seite 104