METVISA CFH.300 Series, Instruction Manual

Page: 9 / 28

9
ATTENTION!
The installation and the place where the equipment will be disposed must comply with the
norms of risk prevention and safety at work (regulatory norm in force in your country).
The manufacturer does not take responsibility for any direct or indirect damages caused by
non-compliance with these rules and other instructions presented in this manual.
3.2 Electrical Connection
The equipment is supplied with a power cord to plug into an electrical outlet. If the power
cord is damaged, it must be replaced with a new one. The exchange must be carried out by the
manufacturer, authorized agent or qualified person, in order to avoid risks.
The type of plug on the power cord varies by country. The installation of the equipment must
be carried out by a technician qualified for this function and observing the current regulations in the
country, especially with regard to grounding connection (if applicable).
Also included with the equipment is an equipotential grounding terminal, located at the rear
of the base covering.