DL7, DL7L
40
8
FIRST START UP AND KEY ACTIVITIES
Having plugged the device to power supply it will automatically switch on after the elapse
of several seconds.
The device has pre-configured hardware and set English language. Before configuring
the device, first login to appropriate level of access.
8.1 Access control, login and change of user password
8.1.1
Access control
In the data recorded, access control module was applied aimed at limiting the possibility
of changing the parameters of work of the device and copying the data from the device by
unauthorized users or operator.
It is realised through 5 access control levels:
No logged in user
Standard operating mode enabling screen viewing. This level does not allow any
modification of the parameters and prohibits access to the device using the USB stick.
The operator may not open any configuration windows, except for the login window. This
level can be turned off (more information in the section
User
The first level of the authorised user. It enables viewing of the device settings, archive
control (start, stop, new archive file), viewing archive, resetting the values - minimum
and maximum, zeroing the totalizers and copying the files through the USB port. In
addition, user may take screenshots.
Administrator
The second level of the authorised user. It enables the same functions which has User
level. In addition, this level enables viewing and modifications of the device settings and
deleting the archive files. Administrator may deprive the User of the ability to control the
archive operation.
Service
This level is accessible solely for the authorised technicians of Metronic AKP.
Factory
The level is accessible solely for the manufacturer.
8.1.2
Login
To login to the relevant access level press the
button on menu bar and then select
the
icon.
It is the only active pictogram in the Menu screen available to the unlogged
user. Next, from the drop down list select the suitable access level and enter the password
using the screen password keyboard. Press
Login
button to confirm the operation.
During the first login, default passwords have to be used:
Access level
Password
User
0
Administrator
1
