21
S
CANNER
O
PERATION
S
CAN
Z
ONE
Figure 29.
Top-Down (13 mil)
IR
A
CTIVATION
A
REA
The Stratos
E
’s default power save mode
†
is
Dual Action Power Save Mode #2 (see page 26)
. This power save mode
†
turns the laser OFF after a configured period of non-use then turns the motor OFF after thirty-minute intervals. Any movement
detected by the IR in the activation area, shown below in grey, will cause the scanner to exit the power save mode. The motor
will restart automatically and the laser will turn back on preparing the scanner for bar code recognition, decoding and
transmission.
Figure 30.
IR Activation Area Perpendicular to Package Flow
†
Refer to the MetroSelect Configuration Guide (00-02407) for additional information on configurable power save modes.
Specifications are subject to change without notice.
