Metrologic Stratos MS2 Series, Configuration Addendum

Page: 12 / 88

7
S
CALE
/L
OAD
C
ELL
C
ONFIGURATION
B
AR
C
ODES
Single or Dual Cable Scale Configuration Bar Codes
Scale Settling Filter Configuration
The following bar codes can be used to configure a Single or
Dual Cable MS2xx0.
The MS2xx0 must be in scale program mode to use these bar codes.
The scale’s filter setting allows the unit to withstand a certain amount of vibration
from the checkout counter. A stronger filter allows for more vibration to be
absorbed but the weight may take a little longer to settle. Scales are normally
shipped with a loose filter.
* Scale = Loose Filter
³ 9 9 6 0 0 5
Loose filter setting for low vibration
environments.
*
Factory Default Setting