THM1176/TFM1186 Use
r’s Manual
v 2.0 r 1.0
– 02/20
Copyright © 2020 Metrolab Technology SA
www.metrolab.com
44
User offset correction:
To be performed before each series of measurements, in Zero Gauss
Chamber supplied
Notes: Does not apply to TFM1186
– see Section 2-6.
6-2 INTERFACE
Interface:
USB 2.0, full speed (12 Mbps)
Class / USB driver:
USBTMC (USB Test & Measurement Class) / USB488
DFU (Device Firmware Upgrade)
Protocol:
IEEE 488.2, SCPI (
Standard Commands for Programmable Instruments
)
Connector:
USB Type A
Power:
USB bus-powered, 4.3V to 5.25V
35 mA min (idle, power-saver on), 90 mA max
Wake-up time from power-
saver:
100 ms
6-3 OPERATING CONDITIONS
Operating temperature:
0°C to +40°C
Storage temperature:
-20°C to +60°C
Operating magnetic field:
Instrument electronics: 3 T max