￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
IC equipment Dialysis 6.5330.100
￭￭￭￭￭￭￭￭
1
1 Introduction
1.1
Description of IC equipment: Dialysis | Dialysis Low
Volume
The IC equipment: Dialysis 6.5330.100 | Dialysis Low Volume 6.5330.200
contains all accessory parts required for Inline Dialysis of matrix-contami-
nated samples (e.g. emulsions, samples containing fat and protein, body
fluids or waste waters with high pollution loads) directly before injection.
The main component of the IC equipment is the high-performance dialysis
cell. The ions travel through the semipermeable membrane, diffusing out
of the flowing sample and into the stationary acceptor solution, where
they are preconcentrated. The ion-preconcentrated acceptor solution is
then subsequently injected directly into the IC system.
To operate the dialysis cell, you need an IC system with a peristaltic pump
and a cell holder as well as a Sample Processor with a peristaltic pump.
1.2
Product versions
The IC equipment: Dialysis | Dialysis Low Volume is available in the follow-
ing versions.
Table 1
Product versions
Art. no.
Designation
Version feature
Volume dialysis
cell
6.5330.100
IC equipment: Dialysis
Dialysis cell (6.2729.100)
240 µL
6.5330.200
IC equipment: Dialysis Low Vol-
ume
Low Volume dialysis cell
(6.2729.200)
60 µL
The Low Volume dialysis cell (6.2729.200) requires a lower sample volume
than the dialysis cell (6.2729.100). The lower sample volume means that
transfer time, dialysis time, and the total analysis time are shorter.
Summary of Contents for Dialysis 6.5330.100
Page 2: ......
