Insert a new module for the Multi Autolab Cabinet
Figure 27 – Editing the serial number of the Multi Autolab Cabinet
5.1.1.2
– Add the M101 or M204 modules to the new Multi Autolab Cabinet
Once the Multi Autolab Cabinet has been identified in the software with its correct serial
number, it is possible to start adding M101 or M204 modules to this cabinet. Using the
drag and drop method, select the AUT4XXXX or AUT5XXXX modules available in the list
on the left-hand side and add them to the Multi Autolab Cabinet (see Figure 28).
Left click a M101 or M204 module and while holding the mouse button, drag it onto the
MAC8XXXX or MAC9XXXX, respectively item in the list. Release the mouse button to add
it to the cabinet.
24 |
P a g e
