￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
940 Professional IC Vario TWO (2.940.2100)
￭￭￭￭￭￭￭￭
33
￭
Guide the other end of the PTFE capillary (6.1803.040) out of the
instrument through a capillary feed-through and connect it to the
Sample Processor, if applicable.
Try to ensure the shortest possible connections (shorten the capil-
lary if necessary).
3.16
Connecting the instrument to a computer
NOTE
If the instrument is connected to the computer, then it must be
switched off.
Accessories
For this step, you need the following accessories:
￭
USB connecting cable (6.2151.020)
Connecting the USB cable
1
Insert the USB cable into the computer connection socket on the rear
of the instrument labeled
PC
.
2
Insert the other end into a USB port on the computer.
